Finished Skull Bottles

So, it's been quite some time that I've blogged. I find it amazing how fast time can pass one by. And I forget to post here because I am usually posting on my facebook page. In looking over my blog, I realize that I show a ton of in progress work, but hardly ever show the finished pieces. Here is my attempt to rectify that situation a bit.

To start out, here are the finished skull bottles.

 I am particularly pleased with this little bottle. It's cute and delicate and very feminine.

 Here's the more manly black and white bottle. As much as I don't like soul patches, this one works well. I should have tried to make a goatee. Next time!

And here's the full on painted bottle. In looking at it now, I think I should have added lipstick to this one. At any rate, I'm happy with it and the colors and patterning turned out quite well.

Finally, here's the vampire skull bottle. I was experimenting with manganese in the eye and nostril sockets. I also used copper in the teeth area. If copper gets enough carbon during the firing process, it can turn red. Oh, and I used a celadon glaze on the whole bottle. Since the firing didn't seem to have as much carbon, the celadon turned more yellow and the copper stayed green.

Vampire Skull bottle

 

 Last night, I finished up the last skull bottle (for now!) I decided that I 'needed' a Vampire skull bottle in my group of skellies. And so, I started. Now, I fully intended to take photos of the sculpture in progress, but got distracted talking to everyone and ended up only with the beginning and the end.

And here you go. Now, I'm not too keen on the eye sockets and cheek bones. Now that I look at it, I think I need to thicken up the cheekbone on top rather than on the bottom. At any rate, I'm happy with this. And, I think I need to make more. A lot more!

Skull bottles

The other day, I went to a friends house and saw some sugar skull bottles of alcohol. (I don't know what alcohol is in them and I don't want to assume it is tequila). But, it made me think... Why haven't I made some skull bottles? Duh!

So, after throwing 7 mug bodies, I decided to throw bottles. I was going to make three bottles out of 1.125 lbs of clay, but the first one turned out too large (same size as the leftmost skull vase). I wanted smaller ones. Bud vases! And so, I wedged up the remaining bits of clay and threw 3 bottles of the mound. And then got bored... there are only so many things I can throw off the mound before I'm just done. I threw a bigger bottle out of the last bit of clay.

Now, one of the tiny bottles died while I was trying to sculpt a skull. So, I ended up with 2 small ones instead of three. I still have to finish the last bigger bottle, but I didn't have time to finish it. That will happen later. And I'll post photos of that one too.

I plan to underglaze these skulls with the sugar skull patterns. However, they do look more like aliens than skull. I think I need to work on the design a bit.

More frogs

Yes, more frogs have been made. These are all pre-ordered too. Gotta love commission work when people are not too picky.

Fox mug glazed

Yes, I am very happy with this mug. Although some of the colors burned out, it still quite lovely. There's a bit of glaze missing on the handle which sort of bugged me and there's a slight imperfection inside at the bottom. End result: not sending this to my favorite comic artist. It's mine.

Nope, I'm not attached. Not at all... Besides, I can always make another one for her teehee

See! More mugs made. 7 more have been thrown and just need to be trimmed and handles added. Oh, I'm working on a commission of 12 right now. So, I'll have two extra when I'm done.

Fox mug

I think foxes are pretty darn adorable. From Fennec foxes to Arctic foxes, these creatures are just so much fun to draw and paint, not to mention look at, admire and just squee out loud over their cuteness.

At any rate, one of my favorite comic book artists loves foxes. She has a stuffie named Mycroft that she shows off on her Facebook page. And me, being the generous soul that I am, well, I've been wanting to send her a piece of pottery. Colleen Doran (http://www.adistantsoil.com/) is an amazing artist who has inspired me since I was around 12 years old if not younger. At first, I was going to send her one of my wall hanging vases. I mean, who am I to send her something drawn? But, I never got around to it. And then I decided that a wall hanger would mean nothing to her as most of my wall hanging customers do ikebana. I don't think Ms. Doran does ikebana.

Next, I decided to make her a fox bead. Carved it, painted it, glazed it. Unfortunately, the glaze was too thick and I lost too much detail for my liking.

And so, it finally came to me to do a mug and to paint a fox. Because, gosh darn it, I can paint and draw too!

Plus, she might get a kick out of it and be able to use it.

Still, if this fox mug turns out, I might have a hard time letting it go. Oh dear, this does not bode well.

Dragon Vase - finished

Earlier this month, I posted some photos of a dragon vase. And now, I can show you the completed version. I am very, very happy with how he turned out!

Rawr!

Now, in my last posting, you could see how I had a lot more detail and some color from the underglaze. However, one of the risks you take in wood/salt firing is that the colors will burn out (very hot temperatures here) and the salt would degrade any textures you put on it. One friend preferred the back side because you could still see the texture. I, however, am just fine with how it turned out. I got an ash drip on his chin (green glassy beard!) and some drips on his back scales.

And, even though his tail separated from the pot during the drying process, the tail flattened and relaxed against the vase. I'll have to take better photos of the vase soon. He'll be posted on Etsy soon enough.